Helibug Open-Source

Helibug Open-Source Version 2

Join us on YouTube

 

Helibug Open-Source Version 2 Gasser Conversion Kit

for Trex 700 / Trex 800 Electric (V3)

(also compatible with Assault 700 and GT700)

(you will need Align Helical Main Gear & Trex700E Front plastic assembly for Assault 700 or GT700 helicopters)

Support 12 different Gear Ratios - See chart below

Designed to convert The All New Trex 700 Electric DFC (V3) into a Gasser Helicopter

Based on Zenoah RC Series of Engines

Slots for Pinion Bearing Block

Uses all parts from Align Trex 700E-DFC (V3)

Everything mounts on engine top - No baseplate link on frames required

 Shock absorbant design

Kit comes with 10 OZ fuel tank, but, you can use more then 20 OZ fuel tank if needed

Includes Trex700N Clutch, New Trex700N Clutch bell, Trex700 Start Shaft and Throttle Servo Link

NO ADDITIONAL PARTS REQUIRED TO COMPLETE 

Align Trex700 Clutch bell with Blue Liner

The new clutch bell from Align with a 'blue' clutch bell liner is the best upgrade from Align. This clutch bell uses thicker clutch liner. It has a much better gap between the original Trex700 Nitro Clutch and the Clutch Bell.

I highly recommend using Align Trex700 Clutch with the NEW Align Trex700 Clutch bell

There is no need to upgrade to Lynx Gas Clutch as original the "Gap" with the older Align Clutch bell was unacceptable for gasser performance. Also, there is no need to fix any tolerances for the Trex700 clutch to fit into the bell as it is factory adjusted for the best performance.

100% compatibilty with the Trex700, flyers can benefit from not only Lynx Gas Clutch, but, also QuickUK standard and HD clutches along with the Lynx stock Trex700 Clutch.  More choices of clutches to choose from !

This applies to All Helibug Gas Connversion Kits which uses Original Trex700 Mechanics

 

Compatible with Align Trex700/800 Electric Part number RH70E09XW and RH80E03XW Helicopters

Unique Transmission System - Always Aligned

 

Supported Gear Ratios

(Using 110T or 112T or 118T Main Gears from Align)

 

 

 

 

---

Conversion Step Reference (Details will be added shortly)

 

 

 

 

 

WARNING: The radio controlled model helicopter built from this conversion kit is not a toy and is not meant for children. It is a flying machine capable of causing property damage and serious bodily harm to both the operator/assembler and/or spectator if not built and operated correctly and responsibly. Rotating components, especially the main rotor blades, are an ever-present danger. Model helicopters operate differently than model cars and airplanes. Helicopters by their nature are not positively stable, meaning that even if properly assembled and adjusted, helicopters will not recover from an unwanted flight attitude, nor will they hold any particular orientation without constant control inputs from the pilot.

IT IS YOUR EXCLUSIVE RESPONSIBILITY TO PROPERLY BUILD, MAINTAIN AND OPERATE HELICOPTER.

HELIBUG has spent considerable time making this product reliable and easy to build, but only the operator can insure that it is safe. Because the safe operation of this helicopter is beyond the control of the Manufacturer and distributor, the owner/operator assumes all risk of use.