Forward Engine Mount

Conversion Steps

   

Mercury 800-DFC Gasser Conversion for forward engine mount

 

Conversion Step Reference (Forward Engine Mount)

There is nothing special in converting Trex700 with this conversion kit. The only addition from the manual is mounting of Zenoah Engine. Below is the step-by-step pictures as installation instructions

 

Install the clutch mount included in the kit

 

Install Engine Mount Plates on the Engine


Install Clutch on Clutch Mount

 

Prepare Base Plate just like its done on stock Trex700

 

Keep these mounts loose on the skids

 

Install Engine on the Base Plate

 

Stock Engine Mount Installation on the frame - Note: Must be install from Inside the frames

 

Thats how it should look from outer side

Note: Install it keeping the notch forward on the Engine mount

 

Screws from Inside

 

Optional third bearing block location under the main gear (Thanks to Align for keeping the main shaft longer)

 

Stock Screws used to mount the engine

 

Whole models sits on the Engine - Just like Plug & Play

 

Mount the engine with stock screws from bottom of the engine mount plate

 

Better View

 

Thats It - Almost done !

 

Less then 1" canopy cutting required for Forward Engine Mount Kit

 

Does not require any cutting if used with any after market muffler

 


 

WARNING: The radio controlled model helicopter built from this conversion kit is not a toy and is not meant for children. It is a flying machine capable of causing property damage and serious bodily harm to both the operator/assembler and/or spectator if not built and operated correctly and responsibly. Rotating components, especially the main rotor blades, are an ever-present danger. Model helicopters operate differently than model cars and airplanes. Helicopters by their nature are not positively stable, meaning that even if properly assembled and adjusted, helicopters will not recover from an unwanted flight attitude, nor will they hold any particular orientation without constant control inputs from the pilot.

IT IS YOUR EXCLUSIVE RESPONSIBILITY TO PROPERLY BUILD, MAINTAIN AND OPERATE HELICOPTER.

HELIBUG has spent considerable time making this product reliable and easy to build, but only the operator can insure that it is safe. Because the safe operation of this helicopter is beyond the control of the Manufacturer and distributor, the owner/operator assumes all risk of use.


   
   
contact us bookmark